When You Need it Now

Fast turnaround, great prices.

Call 1.800.879.8273

Professional media services since 1975

Templates

MediaXpress provides these templates as a service to professional graphic designers. If you have any questions about the set-up of your graphics files, don't see the template you need, or would benefit from technical support in the use of these templates, please contact us at 800.879.8273 or e-mail us.

Important:The templates listed in the tables below are standard for most projects. However, to ensure you are using the correct template for your specific project please contact our graphics department prior to designing your project. PC and Mac "Download" link accesses a zipped file with templates including some or all the following formats: PDF, EPS, QXD, PSD, INDD

Click on the panel title to reveal the content. Click title again to close the panel.

Jewel Case Insert Templates
Template Type Specs PC Mac
2 panel insert
2 Panel Insert
 Total Width = 120.65mm (4.75")
Total Height = 119.855mm (4.719")

2 PANEL NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

 Download Download
4 panel insert
4 Panel Insert
 Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

4 PANEL FOLDER NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the right and the back must be on the left as shown above.

Do not make separate files or use page spreads.

 Download Download
6 panel insert
6 Panel Insert
 Total Width = 359.136mm (14.139")
Total Height = 120.65mm (4.719")
Cover and Middle Panel Width = 120.65mm (4.75")
Cover and Middle Panel Height = 119.855mm (4.719")
Back Panel Width = 117.475mm (4.625")
Back Panel Height = 120.65mm (4.719")

6 PANEL FOLDER NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the right and the back must be on the far left as shown above.

Note: The back is slightly smaller in width to allow for fold in.

Do not make separate files or use page spreads.

 Download Download
6 panel insert
8 Panel Insert
 Total Width = 241.3mm (9.5")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

8 PAGE BOOKLET NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the right and the back must be on the left as shown above.

Do not make separate files or use page spreads.

 Download Download
6 panel insert
8 Panel Roll Fold
 Total Width = 482.6mm (19")
Total Height = 119.855mm (4.719")
Panel Width = 120.65mm (4.75")
Panel Height = 119.855mm (4.719")

8 PANEL ACCORDION
FOLDER NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the right and the back must be on the far left as shown above.

Do not make separate files or use page spreads.

 Download Download
Board Mailer Templates
Template Type Specs PC Mac
2 panel board mailer
2 Panel Board Mailer
 Specifications are outlined in the PC or Mac template. Download Download
4 panel board mailer
4 Panel Board Mailer:
1 Pocket
 Specifications are outlined in the PC or Mac template. Download

 Download
4 panel board mailer
4 Panel Board Mailer:
2 Pocket
 Specifications are outlined in the PC or Mac template. Download

 Download
6 panel board mailer
6 Panel Board Mailer:
1 Pocket
 Specifications are outlined in the PC or Mac template. Download

 Download
2 panel board mailer
6 Panel Board Mailer:
2 Pocket
 Specifications are outlined in the PC or Mac template. Download

 Download

Adhesive Board Mailer Templates
Template Type Specs PC Mac

2 panel board mailer
2 Panel Board Mailer:
Peel, Seal & Zip

Specifications are outlined in the PC or Mac template. Download Download
4 panel board mailer
4 Panel Board Mailer:
Peel, Seal & Zip
Specifications are outlined in the PC or Mac template. Download

 Download
Tray Card Template
Template Type Specs PC Mac

2 panel board mailer
Tray Card Template

 Total width, including spines = 150.5mm (5.925")
Total height = 117.5mm (4.626")
The spines width = 6.35mm (.25")
The spines height = 117.5mm (4.626")
The actual back tray width = 137.8mm (5.425")
The actual back tray height = 117.5mm (4.626")

TRAY CARD NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.
Barcodes (UPC symbols) should be black on a white background.

You can reduce the barcode only if the width and height are reduced by the same amount.

If MediaXpress is supplying your project a barcode, it can mailed to you or E-mailed to you as a black and white "Tiff" file.

 Download Download
Digipak Template
Template Type Specs PC Mac

2 panel board mailer
Digipak
Template

 Total Width = 287.122mm (11.304")
Total Height = 250.825mm (9.875")
Panel Width = 140.176mm (5.519")
Panel Height = 125.219mm (4.93")

4 PANEL DIGIPACK NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the bottom right and the back must be on the bottom left.
Do not make separate files or use page spreads.

 Download Download
DVD Outerwrap and 2 Panel Insert Template
Template Type Specs PC Mac
outerwrap
DVD Outerwrap
 Specifications are outlined in the PC or Mac template. Download Download

2 panel board mailer
2 Panel Insert
Template

 Total Width = 287.122mm (11.304")
Total Height = 250.825mm (9.875")
Panel Width = 140.176mm (5.519")
Panel Height = 125.219mm (4.93")

4 PANEL DIGIPACK NOTES
Include a bleed of 3.7mm (.125") on all four sides of the printed area.

The cover must be on the bottom right and the back must be on the bottom left.

Do not make separate files or use page spreads.

 Download Download
CD Imprint
Template Type Specs PC Mac

2 panel board mailer
CD Imprint
Template

Outside Diameter = 116 mm
Inside Diameter A-Spec = 38 mm
Inside Diameter B-Spec = 23 mm

CD IMPRINT NOTES
The outside diameter must be 116mm by 116mm (a true circle).

The center hole must be knocked out on each film used. Do not print in this area.

LINE WIDTH AND TYPE SIZE

  1. Minimum line width is 0.5 pt.
  2. Minimum letter size is 4 pt. bold.
  3. Minimum line width in knockout form is 0.75 pt.
  4. Minimum letter size in knockout form is 6 pt. bold.

 

Donwload A-Spec

Download B-Spec

Download A-Spec

Download B-Spec
CD Business Card Template
Template Type Specs PC Mac

2 panel board mailer
CD Business Card Template

Specifications are outlined in the PC or Mac template.

 Download Download
Mini CD Template
Template Type Specs PC Mac

2 panel board mailer
Mini CD Template

Specifications are outlined in the PC or Mac template.

 Download Download

img